-
1 номинальная емкость химического источника тока
- capacité assignée, f
номинальная емкость химического источника тока
номинальная емкость
Емкость, на которую рассчитан химический источник тока, указываемая изготовителем.
[ ГОСТ 15596-82]
номинальная емкость
Соответствующее приближенное количество электричества, используемое для идентификации емкости аккумулятора или батареи. Эта величина обычно выражается в ампер-часах.
[Инструкция по эксплуатации стационарных свинцово-кислотных аккумуляторных батарей в составе ЭПУ на объектах ВСС России. Москва 1998 г.]EN
rated capacity
capacity value of a battery determined under specified conditions and declared by the manufacturer
[IEV number 482-03-15]FR
capacité assignée, f
valeur de la capacité d'une batterie déterminée dans des conditions spécifiées et déclarée par le fabricant
[IEV number 482-03-15]Тематики
Классификация
>>>Синонимы
EN
DE
- Bemessungskapazität, f
- Nennkapazität
- Nennkapazität der chemischen Stromquelle
FR
- capacité assignée, f
Русско-французский словарь нормативно-технической терминологии > номинальная емкость химического источника тока
-
2 номинальная способность к присоединению
- connection capacity
- capacité de raccordement
- capacité de connexion assignée
- capacité assignée de raccordement
- capacité assignée de connexion
номинальная способность к присоединению
Диапазон и/или число номинальных сечений проводников, на которое рассчитана клемма
[ ГОСТ Р 50030.7.1-2000]EN
rated connecting capacity
range of cross-sections and, if applicable, the number of connectable conductors, for which the terminal block is designed
[IEC 60947-7-1, ed. 3.0 (2009-04)]
rated connecting capacity
cross-sectional area of the largest conductor(s) to be connected as stated by the manufacturer of the installation couple
[IEC 61535, ed. 1.0 (2009-02)]
rated connecting capacity
cross-sectional area of the largest conductors as declared by the manufacturer
[IEC 60670-22, ed. 1.0 (2003-05)]
rated connecting capacity
cross-sectional area of the largest rigid conductor(s) to be connected as stated by the manufacturer of the connecting device. In the case of a connecting device for flexible conductors only, the rated connecting capacity is the cross-sectional area of the largest flexible conductor to be connected
[IEC 60998-1, ed. 2.0 (2002-12)]FR
capacité assignée de raccordement
gamme de sections et, le cas échéant, nombre de conducteurs raccordables, pour lesquels le bloc de jonction est conçu
[IEC 60947-7-1, ed. 3.0 (2009-04)]
capacité assignée de connexion
section du ou des plus grands conducteurs susceptibles d’être connectés comme indiqué par le fabricant du coupleur d’installation
[IEC 61535, ed. 1.0 (2009-02)]
capacité assignée de connexion
section du ou des plus gros conducteurs déclarée par le constructeur
[IEC 60670-22, ed. 1.0 (2003-05)]
capacité de connexion assignée
section du ou des plus gros conducteurs rigides à raccorder, déclarée par le constructeur du dispositif de connexion. Dans le cas d'un dispositif de connexion pour conducteurs flexibles uniquement, la capacité de connexion assignée est la section du plus gros conducteur flexible à raccorder
[IEC 60998-1, ed. 2.0 (2002-12)]Тематики
- вывод, зажим электрический
- изделие электроустановочное
- клемма электротехническая
EN
FR
Русско-французский словарь нормативно-технической терминологии > номинальная способность к присоединению
-
3 допустимое сечение присоединяемых проводников
допустимое сечение присоединяемых проводников
-
[IEV number 442-06-32]EN
rated connecting capacity
The cross-sectional area of the largest rigid conductor(s) to be connected as stated by the manufacturer of the connecting device
[IEV number 442-06-32]FR
capacité assignée de connexion
Section du(des) plus gros conducteur(s) rigide(s) pouvant être raccordé(s), indiquée par le constructeur du dispositif de connexion
[IEV number 442-06-32]EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > допустимое сечение присоединяемых проводников
-
4 критический ток короткого замыкания
критический ток короткого замыкания
Значение тока отключения ниже номинальной наибольшей отключающей способности, при котором энергия дуги значительно выше, чем при номинальной наибольшей отключающей способности.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
critical short-circuit current
value of breaking current, less than the rated short-circuit breaking capacity, at which the arc energy is significantly higher than at the rated short-circuit breaking capacity
[IEC 60947-1, ed. 5.0 (2007-06)]FR
courant critique de court-circuit
valeur de courant coupé inférieure au pouvoir assigné de coupure en court-circuit, à laquelle l'énergie d'arc est notablement plus grande qu'au pouvoir assigné coupure en court-circuit
[IEC 60947-1, ed. 5.0 (2007-06)]Тематики
- выключатель автоматический
- выключатель, переключатель
- электротехника, основные понятия
EN
FR
Русско-французский словарь нормативно-технической терминологии > критический ток короткого замыкания
-
5 номинальная паропроизводительность стационарного котла
номинальная паропроизводительность стационарного котла
Наибольшая паропроизводительность, которую стационарный котел должен обеспечивать в длительной эксплуатации при сжигании основного топлива или подводе номинального количества теплоты при номинальных значениях параметров пара и питательной воды с учетом допускаемых отклонении.
[ ГОСТ 23172-78]Тематики
- котел, водонагреватель
EN
DE
FR
35. Номинальная паропроизводительность стационарного котла
D. Nenndampfleistung
Е. Rated steaming capacity
F. Puissance nominale de la chaudiere
Наибольшая паропроизводительность, которую стационарный котел должен обеспечивать в длительной эксплуатации при сжигании основного топлива или подводе номинального количества теплоты при номинальных значениях параметров пара и питательной воды с учетом допускаемых отклонений
Источник: ГОСТ 23172-78: Котлы стационарные. Термины и определения оригинал документа
Русско-французский словарь нормативно-технической терминологии > номинальная паропроизводительность стационарного котла
-
6 номинальная теплопроизводительность стационарного котла
номинальная теплопроизводительность стационарного котла
Наибольшая теплопроизводительность которую стационарный котел должен обеспечивать в длительной эксплуатации при номинальных значениях параметров с учетом допускаемых отклонений.
[ ГОСТ 23172-78]Тематики
- котел, водонагреватель
EN
DE
FR
36. Номинальная теплопроизводительность стационарного котла
D. Nennwarmeleistung
Е. Rated heating capacity
F. Pouvoir calorifique nominal de la chaudiere
Наибольшая теплопроизводительность, которую стационарный котел должен обеспечивать в длительной эксплуатации при номинальных значениях параметров с учетом допускаемых отклонений
Источник: ГОСТ 23172-78: Котлы стационарные. Термины и определения оригинал документа
Русско-французский словарь нормативно-технической терминологии > номинальная теплопроизводительность стационарного котла
-
7 рабочая наибольшая отключающая способность
рабочая наибольшая отключающая способность
Отключающая способность, для которой согласно предписанным условиям, в соответствии с установленным циклом испытаний, предполагают способность данного выключателя длительно проводить свой номинальный ток.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
рабочая наибольшая отключающая способность
Отключающая способность, для которой предписанные условия соответственно указанному циклу испытаний предусматривают способность выключателя проводить в течение условного времени ток, равный 0,85 тока нерасцепления.
[ ГОСТ Р 50345-99( МЭК 60898-95)]
рабочая отключающая способность при коротком замыкании
-
[IEV number 442-05-50]EN
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry its rated current continuously
[IEC 60947-2, ed. 4.0 (2006-05)]
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry 0,85 times its non-tripping current for the conventional time
Source: see 442-05-54, 55
[IEV number 442-05-50]FR
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d’essais spécifiée comprennent l’aptitude du disjoncteur à être parcouru en permanence par son courant assigné
[IEC 60947-2, ed. 4.0 (2006-05)]
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d'essai spécifiée comprennent l'aptitude du disjoncteur à être parcouru par un courant égal à 0,85 fois son courant de non-déclenchement pendant le temps conventionnel
Source: voir 442-05-54, 55
[IEV number 442-05-50]
Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- выключатель, переключатель
Синонимы
ПримечаниеТермин по МЭС 442-05-50EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > рабочая наибольшая отключающая способность
-
8 длительный допустимый ток
- courant permanent admissible, m
- courant admissible, m
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Русско-французский словарь нормативно-технической терминологии > длительный допустимый ток
-
9 сверхток
сверхток
Любой ток, превышающий номинальный
МЭК 60050(441-11-06).
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
[ ГОСТ Р 50345-99( МЭК 60898-95)]
сверхток
Электрический ток, превышающий номинальный электрический ток.
Сверхток представляет собой любой электрический ток, величина которого превышает номинальный ток какого-либо элемента электроустановки здания или используемого в ней электрооборудования, например: номинальный ток электрической цепи, допустимый длительный ток проводника, номинальный ток автоматического выключателя и т. д. В нормативной и правовой документации различают два основных вида сверхтока – ток перегрузки и ток короткого замыкания.
Появление сверхтока в каком-либо элементе электроустановки здания может привести к его перегреву, возгоранию и, как следствие, к возникновению пожара в здании. Поэтому в электроустановках зданий выполняют защиту от сверхтока.
[ http://www.volt-m.ru/glossary/letter/%D1/view/59/]
сверхток
сверхток в электротехническом изделии
Ток, значение которого превосходит наибольшее рабочее значение тока электротехнического изделия (устройства).
[ ГОСТ 18311-80]
сверхток
Электрический ток, превышающий номинальный электрический ток.
Примечание - Для проводников номинальный ток считается равным длительному допустимому току.
[ ГОСТ Р МЭК 60050-826-2009]
Сверхток может оказывать или может не оказывать вредные воздействия в зависимости от его величины и продолжительности. Сверхтоки могут возникать в результате перегрузок в электроприемниках или при повреждениях, таких как короткие замыкания или замыканиях на землю
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]
сверхток
Любой ток, превышающий номинальное значение. Для проводов номинальным значением является допустимый ток.
[ ГОСТ Р МЭК 60204-1-2007]EN
overcurrent
electric current exceeding the rated electric current
NOTE – For conductors, the rated current is considered as equal to the current-carrying capacity
[IEV number 826-11-14]
over-current
<>current exceeding the rated current
<>[IEC 61095, ed. 2.0 (2009-02)]
over-current
electric current the value of which exceeds a specified limiting value
[IEV number 151-15-28]
[IEV number 442-01-20]FR
surintensité, f
courant électrique supérieur au courant électrique assigné
NOTE – Pour des conducteurs, on considère que le courant assigné est égal au courant admissible.
[IEV number 826-11-14]
surintensité
courant supérieur au courant assigné
[IEC 61095, ed. 2.0 (2009-02)]
[IEV number 442-01-20]
surintensité, f
courant électrique dont la valeur dépasse une valeur limite spécifiée
[IEV number 151-15-28]Параллельные тексты EN-RU The design of LV installations leads to basic protection devices being fitted for three types of faults:
-
overloads
-
short-circuits
-
insulation faults
Низковольтные электроустановки должны быть оснащены устройствами защиты трех типов:
-
от перегрузки;
-
от короткого замыкания;
- от токов утечки.
[Перевод Интент]
Примечание.
Слово fault в данном случае пришлось опустить, поскольку:
- его нельзя перевести как "неисправность", т. к. возникновение перегрузки ( overload) не является неисправностью;
- его нельзя перевести как "сверхток", т. к. ток утечки не является сверхтоком.The chosen switchgear must withstand and eliminate faults at optimised cost with respect to the necessary performance.
[Schneider Electric]Выбранная аппаратура распределения должна иметь такие характеристики, чтобы рентабельно выдерживать и ограничивать сверхтоки.
[Перевод Интент]Тематики
Синонимы
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > сверхток
-
overloads
-
10 характеристика I2t автоматического выключателя
- caractéristique I2t d’un disjoncteur
характеристика I2t автоматического выключателя
Информация (как правило, в виде кривой), представленная максимальными, по времени отключения, значениями I2t как функция ожидаемого тока (действующее значение симметричной составляющей для переменного тока) от пикового значения ожидаемого тока, удовлетворяющего номинальной отключающей способности при коротком замыкании и соответствующем напряжении.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
характеристика I2t выключателя
Кривая, отражающая максимальные значения I2t как функцию ожидаемого тока в указанных условиях эксплуатации.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
I2t characteristic of a circuit-breaker
information (usually a curve) giving the maximum values of I2t related to break time as a function of prospective current (r.m.s. symmetrical for a.c.) up to the maximum prospective current corresponding to the rated short-circuit breaking capacity and associated voltage
[IEC 60947-2, ed. 4.0 (2006-05)]FR
caractéristique I2t d’un disjoncteur
information (généralement une courbe) donnant les valeurs maximales de I2t correspondant à la durée de coupure en fonction du courant présumé (valeur efficace de la composante périodique en courant alternatif) jusqu’à la valeur maximale du courant présumé correspondant au pouvoir assigné de coupure en court-circuit à la tension correspondante
[IEC 60947-2, ed. 4.0 (2006-05)]Тематики
EN
FR
- caractéristique I2t d’un disjoncteur
Русско-французский словарь нормативно-технической терминологии > характеристика I2t автоматического выключателя
См. также в других словарях:
rated capacity — noun A general term for the output of a piece of equipment under specified conditions • • • Main Entry: ↑rate … Useful english dictionary
rated capacity — The quantity of electricity which can be drawn from a fully charged battery for 20 hours by a constant discharging current until cutoff voltage of 1.75 volts per cell is reached. Compare ampere hour capacity … Dictionary of automotive terms
Wind Turbine Rated Capacity — The amount of power a wind turbine can produce at its rated wind speed, e.g., 100 kW at 20 mph. The rated wind speed generally corresponds to the point at which the conversion efficiency is near its maximum. Because of the variability of the… … Energy terms
rated — rate rate 2 verb 1. [transitive] to think that someone or something has a particular quality, value, or standard: rate be rated ( as) something • The Salzburg Sheraton is rated as one of the city s best hotels. • I … Financial and business terms
capacity — [1] The ability to contain or hold something. [2] Maximum production attainable under normal conditions. With regard to normal conditions, the company s operating practices are to be followed with respect to the use of production facilities,… … Dictionary of automotive terms
capacity rating — See rated capacity … Dictionary of automotive terms
capacity factor — noun : the ratio of the average load carried by a power station or system for a given period to the rated capacity of the station or system for the same period compare load factor … Useful english dictionary
Capacity — The load that a power generation unit or other electrical apparatus or heating unit is rated by the manufacture to be able to meet or supply. The maximum load a generating unit, generating station, or other electrical apparatus is rated to… … Energy terms
Declared net capacity — (DNC) is a measure of the contribution that a power station makes to the overall capacity of a distribution grid. It is measured in megawatts (MW), or in megawatts electrical (MWe) for a thermal power station. DNC is sometimes expanded as… … Wikipedia
Nameplate capacity — Nameplate capacity, also known as the rated capacity, nominal capacity, installed capacity or maximum effect, refers to the intended technical full–load sustained output of a facility such as a power plant,[1][2] a chemical plant,[3] fuel… … Wikipedia
nominal capacity — See rated capacity … Dictionary of automotive terms